Oil Filter
It filters and purifies sediments formed by oil deterioration, such as impurities such as metal powder and carbon sludge in engine oil.
If you don't replace it, these issues will occur...
Engine oil shortages and deterioration not only prevent the engine from performing at its best but also cause engine failure.
Hydraulic Oil
Power transmission: Power from hydraulic equipment is transmitted to the working equipment.
Lubrication: By creating an oil film on the surface of parts, it suppresses wear on high-speed operating parts and ensures smooth
operation.Rust prevention: By creating an oil film on the surface of parts to prevent rust, it suppresses wear and ensures smooth operation.
Cooling effect: Absorbs heat generated inside the equipment to prevent deformation and damage to components caused by heating.
If you don't replace it, these issues will occur...
Clog occurs, and fine sand, dust, and dust are sent into the engine, accelerating part wear, reducing power, and shortening engine
life.
Fuel Filter
The fuel is filtered to remove water and debris mixed into the fuel.
If you don't replace it, these issues will occur...
If the filter can no longer remove debris sufficiently, fuel injection decreases, leading to poor starting performance and reduced
power.If the filter cannot remove enough water, idling rotation becomes irregular or stalling is more likely, leading to engine damage.
Hydraulic Fluid Filter
After completing work with the hydraulic unit, dust and iron powder from the hydraulic oil return to the
oil tank are removed by the return filter, and the suction filter prevents debris from entering the
hydraulic circuit.
If you don't replace it, these issues will occur...
If the filter becomes clogged, contaminated hydraulic fluid will be returned to the tank, negatively impacting the entire hydraulic system and causing abnormal noises and reduced power. In the worst case, contamination can cause the control valve to malfunction
Hydraulic Pilot Filter
We are cleaning the hydraulic fluid supplied to the pilot valves and control lines by removing any debris.
If you don't replace it, these issues will occur...
If the filter becomes clogged, unfiltered hydraulic fluid will be sent into the equipment, negatively impacting the control line.
- Slower rotation speed of the main unit.
- Slower speed of the work equipment (arm, boom, bucket).